Bearing floorboards
do it easy
It is recommended that joist layers should be sized in accordance with NBI’s Joisting Table for high rigidity. The Joisting Table for minimum rigidity should only be used in secondary spaces where there are reduced requirements for comfort. The joist layer must be levelled and carefully installed with exact centre-to-centre spacing. All free board and slab edges must be supported. Before embarking on installation, the site must be closed, ventilated and the heating functioning.
The boards must be installed in direct connection with the levelled joist layer with the stamped side up. The boards must be installed lengthwise on the joist layer. The boards are screwed or glued to the joists and glued at all joints. This makes the floor more rigid and reduces the risk of squeaking when the joists dry. The screws are sunk 2-3 mm into the board. Forestia 18 mm Floor requires the use of a rigid covering floor, such as a parquet floor.
for hydronic heating
Genius! Save yourself the job of milling u-turn grooves.
- Three milled turn grooves per board
- Board size is 22x600x1220mm, std P6
- Work climate is improved as no sawdust is created by the milling process
- Building process is simplified
- Faster progress in your project when you don`t have to mill groove yourself
- The Forestia Thermo turn board must be installed together with Forestia Thermo floor std P6 in size 22x620x1820mm
 |
  |
